Why Earthing is necessary?
Earthing is the process of flow of excessive amount of fault current of the electrical energy directly into the ground with the help of the low resistance wire is called earthing. The electrical earthing is done by connecting the non-current carrying part of the equipment or neutral of the supply system to the ground. It helps in the dissipation of the excessive amount of fault current directly into the ground, and ensure safety. Let us discuss some earthing necessities.
Earthing is necessary!: The reasons
The prime reasons why earthing is necessary is given as follows:
- Secures the safety of human beings from the excessive amount of electric shock.
- Guarantees the safety of electrical appliances and devices from the excessive amount of electric current.
- Assures safety from the fire which may be occurred from the current leakage.
- Provides the way to default current even after the failure of the insulation.
- Protects the appliances from high voltage surges and lightning discharge.
- It provides an alternative path for leakage of current.
- Earthing keeps the voltage constant in the healthy phase.
- It protects the Electric system and buildings from lightning.
- Earthing avoids the risk of fire in the electrical installation system.
Earthing is very necessary for some industries and sectors and consequently used in:
- Dg Set
- Lightening system
- Solar system
- Power plant
- Cement plant
- Steel plant
- For every electrical installation
Types of Earthing:
These are some main types of the earthing system given below:
1- Plate Earthing:
Plate earthing requires a plate electrode made of copper or galvanized iron buried in pits vertically more than 10 feet inside the ground. The pit is then filled with salt and charcoal. The dimensions of the ideal copper plate earthing are 60cm x 60cm x 3.18mm. The dimension for ideal galvanized iron is 60cm x 60cm x 6.35 mm.
2- Pipe Earthing:
A pipe earthing system is a pipe made of galvanized steel or iron is buried vertically into the ground. The pipe earthing size depends on the magnitude of current and type of soil which includes moisture soil, sandy soil, rocky soil. Pipe earthing helps in the dissipation of fault current in the electrical system.
3- Rod Earthing:
These rods are specially designed rods made of metal and alloys to conduct fault current. Similar to the Pipe earthing. A copper rod replaces the pipe electrode for burying a rod made of copper or galvanized iron.
4- Wire Earthing:
In wire earthing, strip electrodes are buried inside these several dug trenches these strip electrodes are made of copper or galvanized iron. The ground wire provides a path back to the source of the electrical current in the fault current.
5- Waterman method:
The process of earthing in which waterman or galvanized Gi pipes is used is known as the Waterman method. In this process, the rod is buried inside the ground to reduce resistance.
There are mainly two types of electrical earthing:
The neutral of the system is directly connected to the earth with the help of Gi wire. This is also known as Earthing. These neutral earthing are used in the generator transformer etc.
The equipment earthing is connected to the earth with the help of the conducting wire. If any fault occurs in the apparatus, the short-circuit current to pass the earth with the help of a wire. Thus, protects the system from damage.
From the above information, I hope all of you are well acquainted with earthing and the type of earthing and the advantage of earthing. Finally, we conclude, earthing is very important for the safety of human beings. And, it saves luxurious and costly electrical appliances from excessive amounts of fault current.
Renown Power System is dealing with the best electrical safety system. Chemical earthing is one of our best products which has the highest selling rate and this is the product. We have manufactured with the latest technology. For further information or for any order of our product.