Solar Earthing Kit

Earthing protects everyone from contact with living or dangerous objects. Solar power plants have been using photovoltaic systems capable of producing electricity for decades. Many solar power plants use Solar Earthing Kit that requires proper design and effective installation by professionals. The performance of any installed electronic equipment depends on how it is installed.

Photovoltaics are used in solar power plants to transform sunlight into energy. When exposed to direct sunlight, silicon-based semiconductor materials create electrons. As a result, these electrons generate an electrical current. It leads to over-voltages in the solar panel system.

According to research, improper/poor earthing causes around 43% of electrical difficulties. A suitable grounding channel is required for each application. Lightning Earthing should be less than 5 Ohms to Substation Earthing 0.5 Ohms.

Whether single-phase or three-phase, no circuit is safe or without proper grounding. A healthy and stable earthing for solar panels is very important for the safety of property from electrical fires, and the safety of people from electric shock, burns, and electrocution in homes, businesses, industries, complexes, and various facilities.

Corroded wiring and connectors, loose wiring, and short circuits caused by improper earthing usually cause electrical shocks. The most important places to look for these conditions in a PV system include junction boxes, PV source, and output circuit conductors, and equipment earthing conductors. The solar earth conductor connects all the metal parts and finally to the earth through the earth electrode conductor and earth electrode.

The solar earthing kit comprises copper-bonded rods, earthing electrodes, a Backfill Compound, and an earthing pit cover. With broad assembling experience to back us, we have planned and built up a Solar Earthing Kit explicitly for photovoltaic frameworks.

Based on Solid Rod Technology, the Solar Earthing Kit includes a strong pole with a 250-micron layer of 99.9% pure copper for easy, reliable, and practical installation.

This Solar Earthing Kit is a pre-assembled, RoHS-compliant, environmentally friendly, non-destructive, carbon-based ground improvement compound that adheres to the IEC62561-7 principles for holding soil moisture and extending the life of the rod. The solar earthing kit is accessible in 14.2mm measurement, 4 feet (1.2mtr) in length.